- Model: SA500
- Capacity: 256GB
- Interface: SATA III, 6.0 GB/s
- Form Factor: 2.5 inch
- Read: 520 MB/s, Write: 450 MB/s
- Stock: In Stock
- Brand: NETAC
- Model: SA500
| Key Features | |
| Capacity | 256GB |
| Flash Type | 3D NAND |
| Form Factor | 2.5 Inch |
| Interface | SATA III 6Gb/s |
| MTBF | 1,500,000 hours |
| Sequential R/W | Max. Sequential Read (MB/s): 520 Max. Sequential Write (MB/s): 450 |
| TBW | 120 |
| Physical Specification | |
| Dimension | Length:100.0mm Width: 69.85mm Height: 7.0mm |
| Weight | 46 gm |
| Temperature | |
| Operating Temperature | 0°C~70°C |
| Shock resistance | 1500g/0.5ms |
| Storage Temperature | -45°C ~ 85°C |
| Warranty Information | |
| Manufacturing Warranty | 03-Year Warranty |
Netac SA500 256GB 2.5-inch SATAIII SSD
The Netac SA500 256GB 2.5" SATA SSD is intended to speed up the response time of notebooks and desktops by combining 3D TLC/QLC NAND Flash and a powerful controller, with read rates of up to 520MB/s and write speeds of up to 450MB/s for quick startup, loading, and data transmission. It is simple to upgrade and works with a wide range of laptops, desktops, and integrated computers.
Stabilization Performance
The Netac SA500 256GB SSD is a solid-state drive. With permanent and reliable functionality, well-chosen 3D NAND Chips can adapt to a variety of challenging situations.
High-speed Interface
The Netac SA500 2.5-inch SSD has a capacity of 256GB. With a SATAIII 6 Gb/s high-speed interface, reading speeds can reach 530MB/s, significantly reducing boot time.
Wide Range of Compatibility
It is simple to upgrade the system and is compatible with a broad range of laptops, desktops, and integrated computers. It provides high performance and cost-effectiveness, as well as support for SLC Caching technology. This is compatible with S.M.A.R.T./TRIM Command/NCQ. Advanced N ANDXtend ECC and data protection technologies improve 3D NAND endurance and retention.
The Netac SA500 256GB 2.5" SATA SSD comes with a 03-year warranty.
